Jag Products

JP-U-EYE RRP £4.99

The JAG Ultra Eye gives 20x magnification, extremely important in sharpening truly perfect hook points. When trying to master the art of precision hook sharpening, the ability to see the results up close makes a huge difference.

Compact design for storage and lens protection.

SP-STN-PACK RRP £8.99
An ULTRA sharp hook is one of the biggest edges in modern specimen angling. It takes practice to sharpen hooks to perfection, but the biggest hurdle angler’s face is inadequate tools for the job.

This is why JAG Products have developed the SP (surgical point) Stones in 2 different grades. Used in conjunction with JAG’s Ultra Eye, hook points can be sharpened to a level far superior to ANY hook straight from the pack.

Fed up of throwing hooks and rigs away because they are blunt? NO MORE, simply re-sharpen the hook and the rig is better than new and you have saved a fortune on expensive rig materials ££££££.

Medium grade. Ideal abrasive for general sharpening.

Fine grade. Perfect abrasive for smaller hooks or final honing

RRP £9.99
Introducing the new SP Max File to the range, in testing sharpening time has been reduced by up to 75% due to the increased metal removal. Use the SP Max File to sharpen the three sides of the hook point before a final hone with the SP Stones. The SP Max File has been developed with Jason Hayward and has been purposely designed for precision hook sharpening with a specific “cut” grade, compact size and special safety edges to avoid damaging the SP Vice. The SP Max File has been manufactured to Jag’s exact specification by a world leading Swiss jewellery file manufacturer, enough said!

The SP Vice has been purpose designed to aid precision hook sharpening. It allows for very secure clamping of any hook pattern and size. The SP Vice is totally unique because it has been designed with a large top surface to act as a guide/steady which enables perfectly honed faces of the hook point. It also allows the hook to be clamped very low which greatly reduces “push off” when filing/honing hook points. The SP Vice has been precision machined by JAG in England, the entire head assembly is manufactured from high grade stainless steel for ultimate durability, the handle is machined from light weight aluminium which has been designed to house a set of SP Stones to keep them safe and at hand whilst saving space. In field testing the vice has allowed anglers to achieve incredibly sharp hooks that had previously struggled to master the technique.

2 Rod 4.75” weight 125 grams £19.99

•Extremely lightweight 100% stainless construction.
•For the travel light/no fuss angler.
•Adjustable caps on all head fittings to achieve perfect alignment of alarms/rear rest and allow maximum clamping of alarms for security.
•Three sizes allow tight/normal/fanned set up options.
•100% designed and manufactured in England

3 Rod Front 9.5”-17” weight 268 grams £43.99
3 Rod Rear 8.5”-15” weight 254 grams £42.99

•Non-retractable thumb screw (never lose a screw again)
•Large diameter precision machined thumbscrew to achieve superior locking.
•Large diameter tubular extension arms, very stable when fully extended.
•Adjustable caps on all head fittings to achieve perfect alignment of alarms/rear rest and allow maximum clamping of alarms for security.
•The extension arms allow rods to be fished very tight to each other or more comfortably spaced or by setting rear tight and front open a wide fan set up can be achieved.
•Although 100% stainless they are surprisingly lightweight.
•100% designed and manufactured in England

10”-16” weight 185 grams £28.99
14”-24” weight 240 grams £30.99

•Non-retractable thumb screw (never lose a screw again)
•Large diameter precision machined thumbscrew to achieve superior locking.
•Large diameter inner tubular section, very stable when fully extended.
•Second point on inner section, perfect for lightweight stalking, also very useful when on hard ground, use this thinner section to make a pilot hole to then place outer section in hole just created.
•Tommy bar and adjustable cap – perfect for maximum clamping on buzzbars and the adjustable cap allows tommy bar to be aligned out of the way.
•Although 100% stainless they are surprisingly lightweight.
•100% designed and manufactured in England

10”-16” weight 180 grams £23.99
14”-24” weight 235 grams £25.99


•Standard head is ideal when fishing single sticks or when maximum clamping is not required.
•Non-retractable thumb screw (never lose a screw again)
•Large diameter precision machined thumbscrew to achieve superior locking.
•Large diameter inner tubular section, very stable when fully extended.
•Second point on inner section, perfect for lightweight stalking, also very useful when on hard ground, use this thinner section to make a pilot hole to then place outer section in hole just created.
•Although 100% stainless they are surprisingly lightweight.
•100% designed and manufactured in England

Weight 150 grams £21.99

•Non-retractable thumb screw (never lose a screw again)
•Two stabilizing points for maximum rigidity.
•Large diameter precision machined thumbscrew to achieve superior locking.
•Main body CNC machined from solid stock for superior strength.
•Although 100% stainless they are surprisingly lightweight.
•100% designed and manufactured in England.

Light weight CNC machined Stainless Steel construction fits directly to alarm and not 3/8” thread. Removable Ears for storage or when not required.

Alarm covers fit with Snag body attached. Alarms can be fitted with single or double Snag Ear configuration.

Stainless Steel fixing screws supplied.

Bursting with innovation.

Complete compact adjustable system, additional banksticks are not required.

NO screw driver required, place supplied driver bit in end of inner section of rear Stage Bite and use to fix supplied screw.

Stage Bite! machined teeth on the base bite into wood for amazing rigidity and zero twist. Once fixed down the Stage Bites are going nowhere.

Replace internal section with any Jag Bankstick for extra height and total flexibility if required.

The thumb Screw that cannot be lost, Jag’s totally unique no-loss system.

CNC machined from solid high grade Stainless Steel delivering a super strong construction.

Rear Stage Bite with magnetic DRIVER system. (Torque head driver supplied. Titanium coated.)
Front Stage Bite shorter to accommodate alarm height.
Supplied with four Teflon coated SPAX screws with torque driver head (2 spares). These screws really are awesome, no slippage of driver, no rounding of screw head and virtually no downward pressure needed when fixing screw.